2003 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...
•    

Starting: Mon Jan 6 16:35:00 CET 2003
Ending: Mon Dec 29 18:09:36 CET 2003
Messages: 310

• [Gmsh] question de visualisation   VandenBosch at emic.ucl.ac.be
• [Gmsh] probleme librairie GLX   tourbier
  • [Gmsh] probleme librairie GLX   Christophe Geuzaine
• [Gmsh] question de visualisation   Christophe Geuzaine
• [Gmsh] Problems with Plugin   Christophe Geuzaine
• [Gmsh] How to make a hole in a volume?   Christophe Geuzaine
• [Gmsh] Reproduceable gmsh 3D meshing error...   Christophe Geuzaine
• [Gmsh] Anisotropic meshing in a particular axis...   Christophe Geuzaine
• [Gmsh] Time-Dependent Cuts   Radek Pecher
  • [Gmsh] Time-Dependent Cuts   Christophe Geuzaine
• [Gmsh] tensor question   Nicolas MOËS
  • [Gmsh] tensor question   Christophe Geuzaine
• [Gmsh] two field question   Nicolas Moes
  • [Gmsh] two field question   Christophe Geuzaine
• [Gmsh] Re: Gmsh bug report   Christophe Geuzaine
  • [Gmsh] Triangle with angle option   Jérôme LEFEVRE
    • [Gmsh] Triangle with angle option   Christophe Geuzaine
• [Gmsh] Bug in 3D mesher of Gmsh - cylinder inside a block...   Toshiro K. Ohsumi
  • [Gmsh] Bug in 3D mesher of Gmsh - cylinder inside a block...   Christophe Geuzaine
  • [Gmsh] Bug in 3D mesher of Gmsh - cylinder inside a block...   David Colignon
• [Gmsh] Computing mean   Pascal A. Dupuis
  • [Gmsh] Computing mean   Christophe Geuzaine
• [Gmsh] Mysterious crashes...   Pascal A. Dupuis
• [Gmsh] 3 questions   GUITON Martin
  • [Gmsh] 3 questions   Christophe Geuzaine
• [Gmsh] Re: [Getdp] question   Christophe Geuzaine
• [Gmsh] source   Ed Peddycoart
  • [Gmsh] source   Christophe Geuzaine
• [Gmsh] Transfinite volume   Joao Pina
  • [Gmsh] Transfinite volume   Christophe Geuzaine
• [Gmsh] Re: gmsh   Christophe Geuzaine
• [Gmsh]   Josef Novák
  • [Gmsh]   Christophe Geuzaine
• [Gmsh]   Christophe Geuzaine
• [Gmsh] GNU GPL   Christophe Geuzaine
• [Gmsh] installing gmsh to FreeBSD   Osamu NAKAMURA
• [Gmsh]   Bondrea Catalin
  • [Gmsh]   laurent CHAMPANEY
    • [Gmsh]   Bondrea Catalin
      • [Gmsh]   Christophe Geuzaine
• [Gmsh] gmsh syntax   steffe at tiscali.it
  • [Gmsh] gmsh syntax   Christophe Geuzaine
• [Gmsh] gmsh syntax   Christophe Geuzaine
• [Gmsh] Ellipse   Alessandro Mori
  • [Gmsh] Ellipse   David Colignon
• [Gmsh] electromagnetic coil   Zvonimir Batarilo
• [Gmsh] Error : Could not restore all edges/faces ....   Jose Paulo Moitinho de Almeida
  • [Gmsh] Error : Could not restore all edges/faces ....   Christophe Geuzaine
    • [Gmsh] Error : Could not restore all edges/faces ....   Christophe Geuzaine
• [Gmsh] regular mesh on a triangle object   Catalin Bondrea
  • [Gmsh] regular mesh on a triangle object   Christophe Geuzaine
• [Gmsh] Possible bug in Gmsh!   Catalin Bondrea
  • [Gmsh] Possible bug in Gmsh!   Christophe Geuzaine
• [Gmsh] Possible bug in Gmsh!   David Colignon
• [Gmsh] Post-traitement GMSH après calcul par ASTER   Irénée Cornaton
• [Gmsh] Post-traitement GMSH après calcul par ASTER   Irénée Cornaton
  • [Gmsh] Post-traitement GMSH après calcul par ASTER   Christophe Geuzaine
• [Gmsh] Post-traitement GMSH après calcul par ASTER   Irénée Cornaton
• [Gmsh] gmsh   kalo81 at virgilio.it
  • [Gmsh] gmsh   Jean-Francois Remacle
• [Gmsh] Animations in gmsh   Stephane Pierre Bordas
  • [Gmsh] Animations in gmsh   Christophe Geuzaine
• [Gmsh] GMSH, extrude to angle greater than pi?   Steffens-Jr, Alfred P
• [Gmsh] GMSH, extrude to angle greater than pi?   David Colignon
• [Gmsh] Triangle input mesh   Kenny Erleben
  • [Gmsh] Triangle input mesh   Christophe Geuzaine
• [Gmsh] compilation error   Jean-Jacques.Bergogne at space.alcatel.fr
  • [Gmsh] compilation error   Christophe Geuzaine
• [Gmsh] maillage reglee   Stage
  • [Gmsh] maillage reglee   Christophe Geuzaine
• [Gmsh] problem with graphics window (Windows version)   Larry McMichael
  • [Gmsh] problem with graphics window (Windows version)   Christophe Geuzaine
• [Gmsh] Structured mesh   paul.carrico at free.fr
  • [Gmsh] Structured mesh   Christophe Geuzaine
• [Gmsh] Bug détecté   Guy Tahon
  • [Gmsh] Bug détecté   Christophe Geuzaine
• [Gmsh] The GPL'd database for Loads of Linux Links now includes http://www.geuz.org/gmsh/   Barbara E. Irwin
• [Gmsh] Re: Mailleur (Gmsh)   Christophe Geuzaine
• [Gmsh] spline interpolation   adam.r.hunt at gmx.net
• [Gmsh] Error Using GMSH on MS2000 w/ 71022 Nodes & 10101 Elements, While Attempting 70,000 Elements   Andrew & Dawn Carl
  • [Gmsh] Error Using GMSH on MS2000 w/ 71022 Nodes & 10101 Elements, While Attempting 70,000 Elements   Christophe Geuzaine
  • [Gmsh] Error Using GMSH on MS2000 w/ 71022 Nodes & 10101 Elements, WhileAttempting 70,000 Elements   David Colignon
• [Gmsh] About import mesher   NGUER Mamadou
  • [Gmsh] About import mesher   Christophe Geuzaine
• [Gmsh] No physical points in mesh?   Toshiro K. Ohsumi
  • [Gmsh] No physical points in mesh?   Christophe Geuzaine
• [Gmsh] malloc.h problems on FreeBSD   Pedro F. Giffuni
  • [Gmsh] malloc.h problems on FreeBSD   Christophe Geuzaine
• [Gmsh] Possible Bug with Orientations   Archi Forshop
  • [Gmsh] Possible Bug with Orientations   Christophe Geuzaine
• [Gmsh] gmsh vim syntax file   laurent CHAMPANEY
• [Gmsh] tensor plot   Nicolas Moes
• [Gmsh] tensor file   Nicolas Moes
  • [Gmsh] tensor file   Christophe Geuzaine
    • [Gmsh] tensor file   Laurent Stainier
      • [Gmsh] tensor file   Christophe Geuzaine
• [Gmsh] Possible Bug with Orientations   Christophe Geuzaine
• [Gmsh] Maillage d'un volume contenant une plaque 2D   gerard Sookahet
  • [Gmsh] Maillage d'un volume contenant une plaque 2D   Christophe Geuzaine
    • [Gmsh] Maillage d'un volume contenant une plaque 2D   Christophe Geuzaine
• [Gmsh] Request for plugins   Pedro F. Giffuni
• [Gmsh] Pb en post-traitement   Nicolas TARDIEU
  • [Gmsh] Pb en post-traitement   Christophe Geuzaine
• [Gmsh] segmentation violation in gmesh   Robert Permann
  • [Gmsh] segmentation violation in gmesh   Christophe Geuzaine
    • [Gmsh] segmentation violation in gmesh   Christophe Geuzaine
• [Gmsh] Message receive it on messages window ....   Catalin Bondrea
  • [Gmsh] Message receive it on messages window ....   Christophe Geuzaine
• [Gmsh] Message receive it on messages window ....   Christophe Geuzaine
• [Gmsh] bug   Daniele Coli'
  • [Gmsh] bug   Christophe Geuzaine
• [Gmsh] Warnings when 3D mesh ...   Catalin Bondrea
  • [Gmsh] Warnings when 3D mesh ...   Christophe Geuzaine
    • [Gmsh] Warnings when 3D mesh ...   Catalin Bondrea
• [Gmsh] gmsh crash   Wladimyr Mattos C. Dourado
  • [Gmsh] gmsh crash   Christophe Geuzaine
• [Gmsh] Geometry definition problem.   olivier
  • [Gmsh] Geometry definition problem.   remacle at gce.ucl.ac.be
    • [Gmsh] Geometry definition problem.   Archi Forshop
• [Gmsh] Geometry definition problem.   olivier
• [Gmsh] questions on a 3D mesh   Joumana EL-GHARIB
  • [Gmsh] questions on a 3D mesh   Christophe Geuzaine
• [Gmsh] the mesh   Joumana EL-GHARIB
• [Gmsh] second order elements   badel at freesurf.fr
  • [Gmsh] second order elements   Christophe Geuzaine
• [Gmsh] Boundary Conditions   Jonas Forssell
  • [Gmsh] Boundary Conditions   Christophe Geuzaine
• [Gmsh] layers   Jin Chen
• [Gmsh] holes and layers   Jin Chen
  • [Gmsh] holes and layers   Christophe Geuzaine
    • [Gmsh] holes and layers   Jin Chen
      • [Gmsh] holes and layers   Christophe Geuzaine
    • [Gmsh] holes and layers   Jin Chen
      • [Gmsh] holes and layers   Christophe Geuzaine
      • [Gmsh] holes and layers   Jin Chen
      • [Gmsh] holes and layers   Christophe Geuzaine
• [Gmsh] Attractor   Jin Chen
  • [Gmsh] Attractor   Christophe Geuzaine
• [Gmsh] Nurbs support?   Bill
  • [Gmsh] Nurbs support?   Christophe Geuzaine
• [Gmsh] Vector size   Nicolas TARDIEU
  • [Gmsh] Vector size   Christophe Geuzaine
• [Gmsh] 3D-Mesh using different element types   Thomas Tsigopoulos
  • [Gmsh] 3D-Mesh using different element types   Christophe Geuzaine
• [Gmsh] clscale question   Timmy Schumacher
  • [Gmsh] clscale question   Tim Schumacher
    • [Gmsh] clscale question   Christophe Geuzaine
• [Gmsh] command line option   Ji, Lin
• [Gmsh] a bug in the solid shading   walter steffe
  • [Gmsh] a bug in the solid shading   Christophe Geuzaine
• [Gmsh] command line option   Ji, Lin
  • [Gmsh] command line option   Christophe Geuzaine
• [Gmsh] Big Post Processing   Nicolas TARDIEU
  • [Gmsh] Big Post Processing   Christophe Geuzaine
• [Gmsh] éléments quadratiques   Stage
  • [Gmsh] éléments quadratiques   Christophe Geuzaine
• [Gmsh] éléments quadratiques   Nicolas Tardieu
• [Gmsh] command line option   Lin Ji
  • [Gmsh] command line option   Christophe Geuzaine
    • [Gmsh] command line option   Christophe Geuzaine
• [Gmsh] petit souci GMSH   Christophe-Mmn DURAND
  • [Gmsh] petit souci GMSH   Christophe Geuzaine
• [Gmsh] éléments du 2ème ordre   yves krähenbühl
  • Re: [Gmsh] éléments du 2ème ordre   Jean-Francois Remacle
    • [Gmsh] éléments du 2ème ordre   Christophe Geuzaine
• [Gmsh] éléments du 2ème ordre   Yves Krähenbühl
• [Gmsh] Re: Full Torus   Christophe Geuzaine
• [Gmsh] About bugs   NGUER Mamadou
  • [Gmsh] About bugs   Christophe Geuzaine
• [Gmsh] (no subject)   NGUER Mamadou
  • [Gmsh] (no subject)   Christophe Geuzaine
• [Gmsh] Re: Full Torus   Christophe Geuzaine
• [Gmsh] Using gmsh interactively   Jide Ogunjobi
  • [Gmsh] Using gmsh interactively   Christophe Geuzaine
• [Gmsh] Using gmsh interactively   Jide Ogunjobi
• [Gmsh] gmsh bug...   Abraham, Rohan (TRANS Contr - Gannon)
• [Gmsh] gmsh bug...   Abraham, Rohan (TRANS Contr - Gannon)
  • [Gmsh] gmsh bug...   Christophe Geuzaine
• [Gmsh] Display Problems in the post-processing Module   Maxime DEBONO
  • [Gmsh] Display Problems in the post-processing Module   Christophe Geuzaine
• [Gmsh] bug   Sarah FRANCKE
  • [Gmsh] bug   Christophe Geuzaine
• [Gmsh] Problem in a 3D mesh generation.   Antonio Manoel Ferreira Frasson
  • [Gmsh] Problem in a 3D mesh generation.   Christophe Geuzaine
• [Gmsh] Bonjour   Ahmad Hammoud
• [Gmsh] Question   Ahmad Hammoud
  • [Gmsh] Question   Jean-Francois Remacle
• [Gmsh] newl doesn't work   Wladimyr Mattos C. Dourado
  • [Gmsh] newl doesn't work   Christophe Geuzaine
• [Gmsh] newl doesn't work -w/ attachment!   Wladimyr Mattos C. Dourado
• [Gmsh] why news is incremented   Wladimyr Mattos C. Dourado
  • [Gmsh] why news is incremented   Christophe Geuzaine
• [Gmsh] why is news incremented? - correct attachment   Wladimyr Mattos C. Dourado
• [Gmsh] Question   Josef Novák
  • [Gmsh] Question   Christophe Geuzaine
• [Gmsh] GMSH for Thermal Codes?   Joe Koski
  • [Gmsh] GMSH for Thermal Codes?   Christophe Geuzaine
• [Gmsh] Re:Using Gmsh geometry Interactively   Jide Ogunjobi
  • [Gmsh] Re:Using Gmsh geometry Interactively   remacle at gce.ucl.ac.be
• [Gmsh] GMSH for Thermal Codes?   Christophe Geuzaine
• [Gmsh] bug in gmsh???   Wladimyr Mattos C. Dourado
  • [Gmsh] bug in gmsh???   Christophe Geuzaine
• [Gmsh] Feature request on GUI   Jean-Francois Rit
• [Gmsh] segfault in gmsh build   Frederick Grim
  • [Gmsh] segfault in gmsh build   Christophe Geuzaine
• [Gmsh] question au sujet du maillage   philippe carette
• [Gmsh] Information about mesh generating methods   Thomas Kalbacher
  • [Gmsh] Information about mesh generating methods   Christophe Geuzaine
• [Gmsh] gmsh problem with 2d mesh   krazz at ceoc.com
  • [Gmsh] gmsh problem with 2d mesh   Christophe Geuzaine
• [Fwd: Re: [Gmsh] segfault in gmsh build]   Christophe Geuzaine
• [Gmsh] Duplicating a point   Pascal A. Dupuis
  • [Gmsh] Duplicating a point   Jean-Francois Remacle
    • [Gmsh] Duplicating a point   Christophe Geuzaine
• [Gmsh] How to enclose a point in a surface ?   philippe carette
  • [Gmsh] How to enclose a point in a surface ?   Christophe Geuzaine
• [Gmsh] gmsh v1.43   Samuel Geniaut
  • [Gmsh] gmsh v1.43   Jean-Francois Remacle
• [Gmsh] Inclure un maillage dans une animation   Lapoumeroulie, Pierre
  • [Gmsh] Inclure un maillage dans une animation   Christophe Geuzaine
• [Gmsh] elements du 2ème ordre   Yves Krähenbühl
  • [Gmsh] elements du 2ème ordre   Christophe Geuzaine
• [Gmsh] Problem with Tools/Visibility   Samuel Geniaut
  • [Gmsh] Problem with Tools/Visibility   Christophe Geuzaine
• [Gmsh] How can i zoom in the work window ?   philippe carette
• [Gmsh] Names cofusing in the visibility window.   Antonio Manoel Ferreira Frasson
  • [Gmsh] Names cofusing in the visibility window.   Christophe Geuzaine
• [Gmsh] How can i zoom in the work window ?   philippe carette
  • [Gmsh] How can i zoom in the work window ?   Christophe Geuzaine
• [Gmsh] Post-processing problem   Pierre-Frederic Villard
  • [Gmsh] Post-processing problem   Christophe Geuzaine
• [Gmsh] Is there some tip to find a node or a mesh ?   philippe carette
  • [Gmsh] Is there some tip to find a node or a mesh ?   Christophe Geuzaine
• [Gmsh] 3d mesh generation for a simple volume   Fred Nastos
  • [Gmsh] 3d mesh generation for a simple volume   Christophe Geuzaine
• [Gmsh] 2D isotropic mesh algorithm : bug in node ordering ?   Bioul Francois
  • [Gmsh] 2D isotropic mesh algorithm : bug in node ordering ?   Christophe Geuzaine
• [Gmsh] bug   Eric Bechet
  • [Gmsh] bug   Christophe Geuzaine
• [Gmsh] Cut Plane   Nicolas Tardieu
  • [Gmsh] Cut Plane   Christophe Geuzaine
• [Gmsh] it seems i fall down on a bug of GMESH ?   tbd4402
  • [Gmsh] it seems i fall down on a bug of GMESH ?   Christophe Geuzaine
• [Gmsh] Question   Antonio Manoel Ferreira Frasson
  • [Gmsh] Question   Christophe Geuzaine
• [Gmsh] Interest in using GMSH in a closed-source project   Juergen Kreis
• [Gmsh] HELP: Win 98 freeze   Arne Wolframm
  • [Gmsh] HELP: Win 98 freeze   Christophe Geuzaine
• [Gmsh] Re: Using gmsh interactively to draw shapes   Jide Ogunjobi
  • [Gmsh] Re: Using gmsh interactively to draw shapes   Christophe Geuzaine
• [Gmsh] commercial license   Jörn Brandt
• [Gmsh] Gmsh   Patrice GENET
  • [Gmsh] Gmsh   Christophe Geuzaine
• [Gmsh] Problem with extrusion   Philippe Lussou
  • [Gmsh] Problem with extrusion   Philippe Lussou
• [Gmsh] Problem with extrusion   Samuel Geniaut
  • [Gmsh] Problem with extrusion   Christophe Geuzaine
• [Gmsh] question?   m-salehin at northwestern.edu
  • [Gmsh] question?   Christophe Geuzaine
• [Gmsh] surface normals   Jack Chessa
  • [Gmsh] surface normals   Christophe Geuzaine
• [Gmsh] 3D Rotate   Munoz, Pedro
  • [Gmsh] 3D Rotate   Christophe Geuzaine
• [Gmsh] Bug report - gmsh 1.47   Maxime DEBONO
  • [Gmsh] Bug report - gmsh 1.47   Christophe Geuzaine
• [Gmsh] unable to add point xxx (will try it later)   Robert Permann
  • [Gmsh] unable to add point xxx (will try it later)   Christophe Geuzaine
• [Gmsh] 3D Rotation graphical problem   Munoz, Pedro
• [Gmsh] Compilation problems with Fltk   Bounhoure Olivier
  • [Gmsh] Compilation problems with Fltk   Christophe Geuzaine
    • [Gmsh] Compilation problems with Fltk   Bounhoure Olivier
• [Gmsh] gmsh BUG ?   Michel Aubourg
  • [Gmsh] gmsh BUG ?   Christophe Geuzaine
• [Gmsh] errors.....   Ramesh Balakrishnan
  • [Gmsh] errors.....   Christophe Geuzaine
    • [Gmsh] errors.....   Ramesh Balakrishnan
      • [Gmsh] errors.....   Christophe Geuzaine
      • [Gmsh] errors.....   Ramesh Balakrishnan
      • [Gmsh] errors.....   Christophe Geuzaine
• [Gmsh] mesh   Cristian Vimer
  • [Gmsh] mesh   Christophe Geuzaine
• [Gmsh] .msh   Geoffrey Deliége
  • [Gmsh] .msh   Christophe Geuzaine
• [Gmsh] Bug in Post-Processing V1.47   Nicolas Tardieu
  • [Gmsh] Bug in Post-Processing V1.47   Christophe Geuzaine
• [Gmsh] Bug in Post-Processing V1.47   Christophe Geuzaine
• [Gmsh] Big PostProcessing   Nicolas Tardieu
  • [Gmsh] Big PostProcessing   Christophe Geuzaine
• [Gmsh] Difficulties with remeshing.   Hans Minnebo
  • [Gmsh] Difficulties with remeshing.   Christophe Geuzaine
• [Gmsh] Format de maillage   Francois PELLEGRINI
  • [Gmsh] Format de maillage   Christophe Geuzaine
• [Gmsh] Demande d'autorisation pour lien vers site Gmsh   Jean-Michel BORLOT
• [Gmsh] Bug in Gmsh   Chris McDermott
  • [Gmsh] Bug in Gmsh   Christophe Geuzaine
• [Gmsh] Delaunay   Farzin Shakib
  • [Gmsh] Delaunay   Jean-Francois Remacle
• [Gmsh] Pb with Extrusion   Nicolas Tardieu
  • [Gmsh] Pb with Extrusion   Christophe Geuzaine
    • [Gmsh] Pb with Extrusion   Christophe Geuzaine
• [Gmsh] BUG: pressing reload crashes gmsh   Gunter Winkler
  • [Gmsh] BUG: pressing reload crashes gmsh   Christophe Geuzaine
• [Gmsh] Hello   Syed Gayaz Basha
• [Gmsh] a question about the colors in the post-processing view   carette philippe
  • [Gmsh] a question about the colors in the post-processing view   Christophe Geuzaine
• [Gmsh] Extruded Mesh Again   Nicolas Tardieu
  • [Gmsh] Extruded Mesh Again   Christophe Geuzaine
• [Gmsh] F16 mesh   Robert Fairlie
• [Gmsh] gmsh-errors   Norbert Guérard
  • [Gmsh] gmsh-errors   Christophe Geuzaine

Last message date: Mon Dec 29 18:09:36 CET 2003
Archived on: Tue May 31 19:55:11 CET 2005

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...