// Gmsh project created on Thu May 28 15:07:56 2009
Point(1) = {4.94, 22.4, 0, 0.01};
Point(2) = {5, 22.4, 0, 0.01};
Point(3) = {5, 22.46, 0, 0.01};
Point(4) = {5, 22.34, 0, 0.01};
Point(5) = {5.06, 22.4, 0, 0.01};
Circle(1) = {1, 2, 3};
Circle(2) = {3, 2, 5};
Circle(3) = {5, 2, 4};
Circle(4) = {4, 2, 1};

Point(6) = {6.375, 19, 0, 0.01};
Point(7) = {6.5, 19, 0, 0.01};
Point(8) = {6.625, 19, 0, 0.01};
Point(9) = {6.5, 18.875, 0, 0.01};
Point(10) = {6.5, 19.125, 0, 0.01};
Circle(5) = {6, 7, 10};
Circle(6) = {10, 7, 8};
Circle(7) = {8, 7, 9};
Circle(8) = {9, 7, 6};

Point(11) = {6.825, 19, 0, 0.01};
Point(12) = {6.95, 19, 0, 0.01};
Point(13) = {7.075, 19, 0, 0.01};
Point(14) = {6.95, 18.875, 0, 0.01};
Point(15) = {6.95, 19.125, 0, 0.01};
Circle(9) = {11, 12, 15};
Circle(10) = {15, 12, 13};
Circle(11) = {13, 12, 14};
Circle(12) = {14, 12, 11};

Point(16) = {6.375, 16.5, 0, 0.01};
Point(17) = {6.5, 16.5, 0, 0.01};
Point(18) = {6.625, 16.5, 0, 0.01};
Point(19) = {6.5, 16.375, 0, 0.01};
Point(20) = {6.5, 16.625, 0, 0.01};
Circle(13) = {16, 17, 20};
Circle(14) = {20, 17, 18};
Circle(15) = {18, 17, 19};
Circle(16) = {19, 17, 16};

Point(21) = {6.825, 16.5, 0, 0.01};
Point(22) = {6.95, 16.5, 0, 0.01};
Point(23) = {7.075, 16.5, 0, 0.01};
Point(24) = {6.95, 16.375, 0, 0.01};
Point(25) = {6.95, 16.625, 0, 0.01};
Circle(17) = {21, 22, 25};
Circle(18) = {25, 22, 23};
Circle(19) = {23, 22, 24};
Circle(20) = {24, 22, 21};

Point(26) = {6.375, 14, 0, 0.01};
Point(27) = {6.5, 14, 0, 0.01};
Point(28) = {6.625, 14, 0, 0.01};
Point(29) = {6.5, 13.875, 0, 0.01};
Point(30) = {6.5, 14.125, 0, 0.01};
Circle(21) = {26, 27, 30};
Circle(22) = {30, 27, 28};
Circle(23) = {28, 27, 29};
Circle(24) = {29, 27, 26};

Point(31) = {6.825, 14, 0, 0.01};
Point(32) = {6.95, 14, 0, 0.01};
Point(33) = {7.075, 14, 0, 0.01};
Point(34) = {6.95, 13.875, 0, 0.01};
Point(35) = {6.95, 14.125, 0, 0.01};
Circle(25) = {31, 32, 35};
Circle(26) = {35, 32, 33};
Circle(27) = {33, 32, 34};
Circle(28) = {34, 32, 31};

Point(36) = {5.44, 12, 0, 0.01};
Point(37) = {5.5, 12, 0, 0.01};
Point(38) = {5.56, 12, 0, 0.01};
Point(39) = {5.5, 11.94, 0, 0.01};
Point(40) = {5.5, 12.06, 0, 0.01};
Circle(29) = {36, 37, 40};
Circle(30) = {40, 37, 38};
Circle(31) = {38, 37, 39};
Circle(32) = {39, 37, 36};

Point(41) = {5.94, 12, 0, 0.01};
Point(42) = {6, 12, 0, 0.01};
Point(43) = {6.06, 12, 0, 0.01};
Point(44) = {6, 11.94, 0, 0.01};
Point(45) = {6, 12.06, 0, 0.01};
Circle(33) = {41, 42, 45};
Circle(34) = {45, 42, 43};
Circle(35) = {43, 42, 44};
Circle(36) = {44, 42, 41};

Point(46) = {6.44, 12, 0, 0.01};
Point(47) = {6.5, 12, 0, 0.01};
Point(48) = {6.56, 12, 0, 0.01};
Point(49) = {6.5, 11.94, 0, 0.01};
Point(50) = {6.5, 12.06, 0, 0.01};
Circle(37) = {46, 47, 50};
Circle(38) = {50, 47, 48};
Circle(39) = {48, 47, 49};
Circle(40) = {49, 47, 46};

Point(51) = {0, 0, 0, 0.01};
Point(52) = {15, 0, 0, 0.01};
Point(53) = {15, 30, 0, 0.01};
Point(54) = {0, 30, 0, 0.01};
Line(41) = {54, 53};
Line(42) = {53, 52};
Line(43) = {52, 51};
Line(44) = {51, 54};

Line Loop(45) = {1, 2, 3, 4};
Plane Surface(46) = {45};
Line Loop(47) = {6, 7, 8, 5};
Plane Surface(48) = {47};
Line Loop(49) = {9, 10, 11, 12};
Plane Surface(50) = {49};
Line Loop(51) = {14, 15, 16, 13};
Plane Surface(52) = {51};
Line Loop(53) = {17, 18, 19, 20};
Plane Surface(54) = {53};
Line Loop(55) = {21, 22, 23, 24};
Plane Surface(56) = {55};
Line Loop(57) = {25, 26, 27, 28};
Plane Surface(58) = {57};
Line Loop(59) = {30, 31, 32, 29};
Plane Surface(60) = {59};
Line Loop(61) = {33, 34, 35, 36};
Plane Surface(62) = {61};
Line Loop(63) = {37, 38, 39, 40};
Plane Surface(64) = {63};
Line Loop(65) = {41, 42, 43, 44};
Plane Surface(66) = {65};
Extrude {0, 0, 20} {
  Surface{66, 46, 48, 50, 52, 54, 56, 58, 60, 62, 64};
}

Point(195) = {5.5, 12.7, 0, 0.001};
Point(196) = {5.5, 12.5, 0, 0.001};
Point(197) = {7, 12.7, 0, 0.001};
Point(198) = {6.8, 12.5, 0, 0.001};
Point(199) = {7, 11.3, 0, 0.001};
Point(200) = {6.8, 11.3, 0, 0.001};
Line(309) = {196, 195};
Line(310) = {195, 197};
Line(311) = {197, 199};
Line(312) = {199, 200};
Line(313) = {200, 198};
Line(314) = {198, 196};
Line Loop(315) = {310, 311, 312, 313, 314, 309};

Plane Surface(316) = {315};
Extrude {0, 0, 1} {
  Line{313, 312, 311, 310, 309, 314};
}
Characteristic Length {204, 205, 195, 197, 202, 206, 196, 198, 201, 203, 199, 200} = 1;

